[nbk13nw]

So F1....

I am running the Eibach Sportlines, FFRP struts / dampers (I know D-Specs needed!)... Foose 20x10 rear with Falken 285/30/20's and 20.8.5 front with 255/35/20's. Used the Spec EZ camber bolts from Specialty Products and the alignment came to within specs. No rub issues or bottoming out issues... yet. I had planned on an adjsutable panhard and brace (Looking at BMR) and G-Trac brace to tie the front end together. I also want to go with some upper and lower control arms and a relocation bracket as well. Are you still pushing the Steeda control arms as opposed to say the BMR stuff? Can you see anything I have forgotten or maybe you have another suggestion.

I don't drag, road or street the car. The roads are mostly good with some nice speed bumps on occassion. Weather is mostly mild as well in this area, not much snow to speak of either.

Any assistance or advice would great! And thanks in advance!