SpooledupRacing

on my 87 5.0 I need to do the ac delete the current setup allready has the air pump deleted.. what belt do I need, and do I need an idler in place of the ac compressor to do the ac delete?

I just want to run the alt, p/s pump, water pump and crank.. and if I still need to use the tensioner just tell me how to route the belt, if I need a idler or what

Dave

sgt_pepper17

you'll definently need the tensioner. I've had buddy's do this and they run into the problem of the tensioner pushing the belt into the water pump pully. I'ld consider getting the a/c delete kit. It should come with a ghost pulley. This will prevent that problem from occuring. Also, most kits come with a replacement belt. Good luck.

fordracing1122

I forget who sells it but it just replaces the a/c compressor with a bracket and an alluminum pulley...
so you can use the same belt...

TENGRAM

i used the FRPP a/c delete kit (~$40). anything custom is not worth the headache IMHO.

SpooledupRacing

frpp?

what brand is that and where can I get one for under 40.00 my current setup is pushing the tensioner into the water pump belt (or within an 1/8" or something.. (no I bought it this way I did not do it lol)

Dave

hardcore91LX

The kit he is talking about is the ford racing one. it moves your powersteering pump up where your A/C is so the belt easily clears the water pump. It is easy to install and is the best kit to get.

SpooledupRacing

is this the one u are refering to??

http://store.summitracing.com/partde...0&autoview=sku

no pulleys or anythign else needed just follow the instructions and I can get a new belt and run my car with no AC

Dave

white93 GT

trick flow makes one that moves the tensioner over where the ac pump used to be. works great and was like 30$

2 kwik

remember when some foxes didn't come with a/c? pull it off and get the non a/c belt

hardcore91LX

Yeah thats the one. Im running it also and can tell you it is a simple install and works great.