Notices
2005-2009 S197 Appearance Section For all appearance mods to the 2005-2009 S197's

Advise for GT500 mod after wreck

Thread Tools
 
Search this Thread
 
Old 09-01-2010, 08:22 PM
  #11  
pascal
S197 Section Modder-ator
 
pascal's Avatar
 
Join Date: Sep 2007
Location: Orlando FL
Posts: 13,373
Default

You should be able to do the conversion with a Grand out of pocket.
Especially if you go with a cheaper aftermarket hood.
The OEM hood for those cars retails at $1300.
It's madness but it's great when you have a wreck of no fault of your own (no deductible applies).

Refer to the sticky for all the needed parts.
pascal is offline  
Old 09-01-2010, 08:52 PM
  #12  
Craig H
Thread Starter
 
Craig H's Avatar
 
Join Date: Aug 2010
Location: Michigan
Posts: 35
Default

OK, just in case anyone else is looking i found this page that has the GT500 part #s listed. Only 2 days of looking :-) ...would have been sooner if not for that darn thing called life getting in the way.

I kinda figured out the lack of response too, there are quite a few GT500 conversion threads on here. Sorry about that one, i promise to look a little harder before i post again!! Anyhow, i guess i will start making some calls to the local dealer and see what kind of prices I can get....although i don't really see how it won't work since the entire front of my car is gone.

Craig H is offline  
Old 09-01-2010, 08:58 PM
  #13  
Craig H
Thread Starter
 
Craig H's Avatar
 
Join Date: Aug 2010
Location: Michigan
Posts: 35
Default

Thanks pascal, i was actually typing my message as you were posting your. I still get the deductible (kind of). Michigan has a great *sarcasm* no fault system. My insurance pays for my car (really glad i didn't switch from AAA to save a few $$s) and I pay me deductible.

I then get to file a mini-tort(law suit) against the other guys insurance for the amount of my deductible up to $500....as long as the guy had insurance.
Craig H is offline  
Old 09-02-2010, 01:50 AM
  #14  
HoboDxb
2nd Gear Member
 
HoboDxb's Avatar
 
Join Date: Dec 2009
Location: Dubai
Posts: 232
Default

Get the Venom II from Trufiber (it's exactly the same as the SS hood but cheaper).
HoboDxb is offline  
Old 09-02-2010, 08:32 AM
  #15  
07 Stang
6th Gear Member
 
07 Stang's Avatar
 
Join Date: Jan 2007
Location: Southeast Virginia
Posts: 6,409
Default

Originally Posted by Craig H
Yeah, that was the general idea, and thank you for all the helpful suggestions!
Craig, first of all sorry to hear about your mishap. There are a lot of members here who have been through what you are about to do. I would give pascal a PM since he has done it and owns a body shop.
Also be aware that many on here are oppose to the the idea of a car being something that it is not. By you putting Snake emblems and the SS badge on your car would be like me (a V6) putting a GT emblem on....which I would NEVER do, I like the Tri-bar too much. LOL
Your car is what it is.....unless you upgrade your engine and tranny, you will still be driving a GT.

Just my 2¢....Good Luck!
07 Stang is offline  
Old 09-02-2010, 10:19 AM
  #16  
geocomp
2nd Gear Member
 
geocomp's Avatar
 
Join Date: Apr 2009
Location: TX
Posts: 269
Default

If you haven't found it yet this is the post you need for the parts list. With in here are several list. Make sure you read through all the post to make sure you know what you will need.

I don't want to take away form the thread that I gave you the link for becasue it is really useful, but here is a list of the parts I needed when I recently did the conversion.

7R3Z-17D957-APTM 1 Bumper assembly
7R3Z-8200-A 1 Grille, radiator
7R3Z-13008-B 1 Headlamp, Left
7R3Z-13008-A 1 Headlamp, Right
7R3Z-15200-A 2 Foglamp
7R3Z-17626-AB 1 Lower valence
7R3Z-17K945-AA 1 Grille, lower
7R3Z-17C882-A 1 FoamIsolator
7R3Z-14290-EA 1 Wiring harness (You can cut and splice for much cheaper)
7R3Z-8C291-AA 1 Radiator Upper Shield
5R3Z-16103-AA 1 Fender Liner Left (Same as V6)
5R3Z-16102-AA 1 Fender Liner Right (Same as V6)
7R3Z-8B455-A 1 Mount Bracket Right
7R3Z-8B455-B 1 Mount Bracket Left
7R3Z-17752-A 1 Headlight Support Bracket Right
7R3Z-17753-A 1 Headlight Support Bracket Left
7R3Z-17C861-A 1 Turnsignal Support Bracket Right, same part number listed for GT bumper
7R3Z-17C861-B 1 Turnsignal Support Bracket Left, same part number listed for GT bumper

On a side note, I am surprised that they didn't total your car, looks like a lot of damage. Good Luck with getting the car back in order. Be sure to post pictures when finished.
geocomp is offline  
Old 09-02-2010, 12:34 PM
  #17  
Craig H
Thread Starter
 
Craig H's Avatar
 
Join Date: Aug 2010
Location: Michigan
Posts: 35
Default

Thanks for the link geocomp, i found that thread last night and skimmed it.

I'm pretty sure that i am going to order a prepackaged kit from express_aero on ebay
It comes with the hood I wanted and price wise works out pretty good to.

If i were to find a local for dealer to get the parts from, and say i could get them from $1600 (low end from what i've read) + tax (6%) =1700. The venom hood i wanted from trufiber was $770 + $150 shipping = $920. Total = $2620 delivered to the shop.

The kit delivered to the body shop (including hood) is $2400 + $265 shipping = $2665

It isn't worth driving all over town picking up parts to save $45 IMO (time + gas).

Last edited by Craig H; 09-02-2010 at 01:15 PM.
Craig H is offline  
Old 09-02-2010, 12:37 PM
  #18  
Craig H
Thread Starter
 
Craig H's Avatar
 
Join Date: Aug 2010
Location: Michigan
Posts: 35
Default

I was also shock that the car wasn't totaled. It was REALLY close though, i think what saved it was that I wanted it repaired (i don't think i would have gotten enough money from the insurance co to make me happy) and it only had 17K miles on it.
Craig H is offline  
Old 09-02-2010, 01:33 PM
  #19  
geocomp
2nd Gear Member
 
geocomp's Avatar
 
Join Date: Apr 2009
Location: TX
Posts: 269
Default

I would be very carefull buying a kit from someone on E-bay. The add shows real customers cars but the yellow car pictured looks like Mellowyellow06's car. MellowYellow06 is the guy that for the most part started this trend on MustangForums and is the one that author'd that thread that I sent you in the early post. I would PM him and see if he can confirm that is his car pictured and if so is he a customer of the e-bay seller.

Oh, and you shouldn't have to drive all over town looking for parts. Call some dealership and get the best price then have them drop ship the parts directly to the bodyshop. I personally used TascoFord, but others recommend Tousley Ford as stated in stickied thread on doing the GT500 conversion.
Originally Posted by NetWise
So I got all my parts now ($1333 + 200 shiping, + 200$ customs - a HELL of a lot bettert han the $3100CAD the local dealers were quoting me - thank you Tousley Ford.).

Last edited by geocomp; 09-02-2010 at 01:43 PM.
geocomp is offline  
Old 09-02-2010, 02:26 PM
  #20  
Craig H
Thread Starter
 
Craig H's Avatar
 
Join Date: Aug 2010
Location: Michigan
Posts: 35
Default

Originally Posted by geocomp
I would be very carefull buying a kit from someone on E-bay. The add shows real customers cars but the yellow car pictured looks like Mellowyellow06's car.
Too late, already pulled the trigger on the ebay purchase. I talked to them a few times on the phone and they were good to deal with. The parts (minus hood) were shipping from Ford Racing.....so hopefully it all works out. If not I at least have paypal + visa + ebay to go to for help.

Also, that is not the same car in their advertisement as Mellowyellow06's. Mellowyellow06 has a cobra emblem on front grill + sides, chrome rims + brake ducts on the front.
Craig H is offline  


Quick Reply: Advise for GT500 mod after wreck



All times are GMT -5. The time now is 04:47 PM.