When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Man those are sharp, especially on the 2010 it makes a big difference!!! This is what I'm buying for myself for my birthday. Has anyone had a problem with them flying off. No need to get it if I lose it going a 110 mph or more.
Man those are sharp, especially on the 2010 it makes a big difference!!!
This is what I'm buying for myself for my birthday. Has anyone had a problem with them flying off.
No need to get it if I lose it going a 110 mph or more.
They dont fly off if you use 4298 adhesion promoter and
lay a few more strips of 3M VHB Emblem tape along
the sides. Mine started to peel at the sides and I had
to remove it and reapply more 3M tape. The getting it
off part was hard as hell and they wont fly off at any
speed but the edges start peeling and if that bothers
you, take it from me and apply a few more strips of
3M tape before you stick it for the first time.
And cover those rear faux gas cap alignment pin holes
with some of the tape as well...