Changing stock 17" rims to 18"
#1
Changing stock 17" rims to 18"
If I was to change my stock 17" rims on my 2009 Grabber Orange GT to 18" rims how far off would my speedometer be off at say 60 MPH? I am looking at these 18" wheels & tires!
http://www.americanmuscle.com/blackf...0509-stan.html
Thanks
http://www.americanmuscle.com/blackf...0509-stan.html
Thanks
Last edited by DylanFan; 05-25-2011 at 10:59 AM. Reason: add something
#3
According to this calculator, it would be off .3 MPH. So, not much.
http://www.1010tires.com/TireSizeCal...?action=submit
http://www.1010tires.com/TireSizeCal...?action=submit
#4
6th Gear Member
According to this calculator, it would be off .3 MPH. So, not much.
http://www.1010tires.com/TireSizeCal...?action=submit
http://www.1010tires.com/TireSizeCal...?action=submit
Last edited by Nuke; 05-25-2011 at 12:02 PM.
#7
I did not install the steering stops and have no issue, I can turn as tight as I can with no rubbing issues, here's what Ford has to say.
For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA
Thread
Thread Starter
Forum
Replies
Last Post
yourmom6990
3.7L V6 Technical Discussions
2
10-14-2015 10:08 PM