Help, regular sequential cable + led units
#1
Help, regular sequential cable + led units
While i had the factory cables installed i replaced th factory lightbulbs with leds. Works like a charm.
I've ordered a sequential taillight kit from Raxiom. Without lights. I've placed the 6 leds in the cable and installed it. Here's what happens.
LED
Lights off and:
- hazard lights on, nothing
- flasher left/right, nothing
- brake, nothing
- and all these combinations, nothing
Lights on and:
- hazard lights, on but no flash
- flasher left/right, on but no flash
- brake, on but no flash
- all of these combinations, still on but no flash
FACTORY BULBS
Everything works.
So what went wrong?
I've ordered a sequential taillight kit from Raxiom. Without lights. I've placed the 6 leds in the cable and installed it. Here's what happens.
LED
Lights off and:
- hazard lights on, nothing
- flasher left/right, nothing
- brake, nothing
- and all these combinations, nothing
Lights on and:
- hazard lights, on but no flash
- flasher left/right, on but no flash
- brake, on but no flash
- all of these combinations, still on but no flash
FACTORY BULBS
Everything works.
So what went wrong?
#5
Yes, the LEDs are POLARITY sensitive.
You might have a few in backwards.
Plus the SJB wants to see a load that
filiment bulbs provide that LEDs dont.
They sell 'Load resistors' at the autozoner
but thats not the best way to address the
problem.
You might have a few in backwards.
Plus the SJB wants to see a load that
filiment bulbs provide that LEDs dont.
They sell 'Load resistors' at the autozoner
but thats not the best way to address the
problem.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM