Led pony logo projector
11-15-2013, 07:14 PM
#51
1st Gear Member
Thread Starter
Join Date: Aug 2012
Location: Canada
Posts: 65
Yes mine came from China,
Sorry, i should have took some pictures when installing mine, didnt know it would be so popular, but i got a wiring diagram ;
Sorry, i should have took some pictures when installing mine, didnt know it would be so popular, but i got a wiring diagram ;
Last edited by Synar; 11-15-2013 at 07:20 PM.
11-16-2013, 02:43 PM
#54
1st Gear Member
Join Date: Jun 2010
Location: Pensacola,FL.
Posts: 91
OK....I was under the impression that the wiring could be taped inside the door and not have to go thru the door jamb?
The schematic that is posted was thoughtful, but alias.....I can't read it.
Looking over here: https://mustangforums.com/forum/2005...r-panel-2.html
They are showing connectors inside the door. Yet mine don't look like that.
Testing alignment with 9V battery....You can barely see the Horse due to the flash on the camera.
And the 2 that hook to the door latch.
You can see the positions better in this pix.
The schematic that is posted was thoughtful, but alias.....I can't read it.
Looking over here: https://mustangforums.com/forum/2005...r-panel-2.html
They are showing connectors inside the door. Yet mine don't look like that.
Testing alignment with 9V battery....You can barely see the Horse due to the flash on the camera.
And the 2 that hook to the door latch.
You can see the positions better in this pix.
01-28-2014, 11:38 PM
#55
Join Date: Jan 2014
Location: AZ
Posts: 1
led logo lights for door (ghost Lights)
I Have the same lights for my mustang but I cant figure out how to hook them up if I have no interior door light nor do I have a switch on the hinge of the door that shows there ever was any power source to the door any help would be great I don't want to run wires from the door all the way up into the roof to the dome light Any Idea so they will come on when the door is open THANKS
01-29-2014, 05:18 AM
#57
Join Date: Apr 2011
Location: Ks
Posts: 15
I started by adding the foot well lights. Do a search for them and start with that. After you have them installed if you can’t figure out the wiring diagram (you are not alone) you have to pull the power through the door and tap into the new foot well lights.
01-31-2014, 08:36 AM
#58
1st Gear Member
Thread Starter
Join Date: Aug 2012
Location: Canada
Posts: 65
I went through from the door into the car ........... painful !!! then after i posted the final project, someone here or in another forum said he tapped positive power in the door lock switch ( theres always power there ) and grounded from the door striker, witch send gound to the window to have it lower a bit when opening the door
07-01-2014, 01:13 PM
#59
Join Date: Feb 2014
Location: Ohio
Posts: 17
anyone know if there is pics of the ghost light install through the latch harness like which harness the one to the actual latch or the one to the lock? and what color is the dome light + and - i have an 01 mustang. any help would be appreciated
ok found the pics but my 01 looks different would stil like to know wire colors if possible
ok found the pics but my 01 looks different would stil like to know wire colors if possible
Last edited by jodyh; 07-01-2014 at 01:17 PM.
