Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

How To: Tigthen e-brake cable *Pix*

Thread Tools
 
Search this Thread
 
Old 07-27-2008, 10:41 PM
  #1  
bb816331
I ♥ Acer
Thread Starter
 
bb816331's Avatar
 
Join Date: Jun 2008
Location:
Posts: 232
Default How To: Tigthen e-brake cable *Pix*

Ok, I asked a while back how to do this since my tard basket cousin yanked the hell out of it, making it feel very loose. I started messing around with it and figured it out. If this has already been posted, I apologize. It is VERY easy:

1. Open the center console. You will notice a little plastic door:



2. Now gently pull this cover off:



3. With the e-brake engaged, you will be able to see the tightening mechanism on the back of it:



4. Using a 10mm deep socket, tighten the nut by turning clock wise:



It depends on how loose your e-brake is as to how many times you have to turn the nut. Just experiment with it: Turn it a few times, then check the e-brake. I ended up turning the nut about 10-15 times. Now the e-brake feels better than when I first got it.

SCORPIONS FTMFW!
bb816331 is offline  
Old 07-27-2008, 11:03 PM
  #2  
samv1368
3rd Gear Member
 
samv1368's Avatar
 
Join Date: Nov 2006
Location: houston texas
Posts: 947
Default RE: How To: Tigthen e-brake cable *Pix*

Thank you, mine hasnt worked since i got it, it holds it in idle but you caan pull it all the way to the ceiling while driving and NOTHING!!
samv1368 is offline  
Old 07-28-2008, 04:02 AM
  #3  
jahudso2
4th Gear Member
 
jahudso2's Avatar
 
Join Date: Dec 2007
Location:
Posts: 1,599
Default RE: How To: Tigthen e-brake cable *Pix*

Nice write up! We should make this a sticky just because you called your cousin a tard basket.
jahudso2 is offline  
Old 07-28-2008, 08:45 AM
  #4  
Boozshey
5th Gear Member
 
Boozshey's Avatar
 
Join Date: May 2005
Location: Tampa
Posts: 4,204
Default RE: How To: Tigthen e-brake cable *Pix*

My cable broke awhile ago and had to install a new cable. I guess I should of done a write up then... O'well...
Boozshey is offline  
Old 07-28-2008, 09:25 AM
  #5  
Maverickaf17
3rd Gear Member
 
Maverickaf17's Avatar
 
Join Date: Mar 2008
Location: Florida
Posts: 551
Default RE: How To: Tigthen e-brake cable *Pix*

My E-brake will go up nearly halfway without pressing the button. Its really annoying when I have my cell phone in my right pocket and I'm driving and I lift my leg just a little and it pushes up the E-brake.

Will this fix that?
Maverickaf17 is offline  
Old 07-28-2008, 09:58 AM
  #6  
bb816331
I ♥ Acer
Thread Starter
 
bb816331's Avatar
 
Join Date: Jun 2008
Location:
Posts: 232
Default RE: How To: Tigthen e-brake cable *Pix*

ORIGINAL: jahudso2

Nice write up! We should make this a sticky just because you called your cousin a tard basket.
Haha...thanks?

ORIGINAL: Maverickaf17

My E-brake will go up nearly halfway without pressing the button. Its really annoying when I have my cell phone in my right pocket and I'm driving and I lift my leg just a little and it pushes up the E-brake.

Will this fix that?
It should. like I said, mine was really loose after he yanked on it. Mine literally has to be pulled on now in order to make it move, so I think it should fix yours. Just turn it in increments and test it out. Like I said mine took quite a few turns before I got it to where I wanted to.

Could anyone make this a sticky? I know it's not much, but it's worth knowing if you don't.
bb816331 is offline  
Old 07-28-2008, 10:21 AM
  #7  
Riptide
6th Gear Member
 
Riptide's Avatar
 
Join Date: Nov 2007
Location: Montaner
Posts: 6,193
Default RE: How To: Tigthen e-brake cable *Pix*

LOL "tard basket"

Ford did this to my mustang when they gave it back to me once. Had one of their guys drive it out to me in front of the waiting room and yanked up hard on that parking brake handle. I about had a coronary.
Riptide is offline  
Old 07-28-2008, 10:44 AM
  #8  
GidyupGo
5th Gear Member
 
GidyupGo's Avatar
 
Join Date: Apr 2007
Location: The High Country
Posts: 3,547
Default RE: How To: Tigthen e-brake cable *Pix*

But what is Ford and the tard doing? Is the cable stretching THAT much, or is something slipping?
GidyupGo is offline  
Old 07-28-2008, 10:49 AM
  #9  
bb816331
I ♥ Acer
Thread Starter
 
bb816331's Avatar
 
Join Date: Jun 2008
Location:
Posts: 232
Default RE: How To: Tigthen e-brake cable *Pix*

ORIGINAL: GidyupGo

But what is Ford and the tard doing? Is the cable stretching THAT much, or is something slipping?
They are over pulling it. Trust me, you can do this to just about any e-brake. There's a line between engaging it and over doing it. Pull on your's til it sits straight up, you'll see what we mean.
bb816331 is offline  
Old 07-28-2008, 10:56 AM
  #10  
GidyupGo
5th Gear Member
 
GidyupGo's Avatar
 
Join Date: Apr 2007
Location: The High Country
Posts: 3,547
Default RE: How To: Tigthen e-brake cable *Pix*

ORIGINAL: bb816331

ORIGINAL: GidyupGo

But what is Ford and the tard doing? Is the cable stretching THAT much, or is something slipping?
They are over pulling it. Trust me, you can do this to just about any e-brake. There's a line between engaging it and over doing it. Pull on your's til it sits straight up, you'll see what we mean.


The cable must be slipping. I never use mine.
GidyupGo is offline  


Quick Reply: How To: Tigthen e-brake cable *Pix*



All times are GMT -5. The time now is 08:25 PM.