Huge Problem with 2009 and Diablo Sport

whyask · 12-23-2008, 01:16 AM

Im trying to help y brother load the tune... he has a JLT intake and flowmaster and were throwing these codes EVERY TIME p0605, P0607, P1000. After the tune loads the car surges like no other. PLEASE HELP..... thanks ! We even put the stock back on and reloaded the tune and still its saying the gas cap is off and check the charging system comes on and cant even go in to gear with out dying.

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!

2cokeman · 12-23-2008, 07:00 AM

Your battery needs to be fully charged before you can load a tune, sounds like your battery was to weak?

illin · 12-23-2008, 11:42 AM

Do you have the U7145? Make sure it is not the U7140.

Gr8T STANG · 12-24-2008, 12:18 AM

If it is the U7145 make sure that it is updated to the latest revision. Plug the programer in and at the menu go to tool info you should have the 9r03 revision. If you don't then you can get it at the Diablosport website.
If you allready have all this then I'd call Diablosport and talk to one of their tech's they are usually very helpful.

rford426 · 12-24-2008, 12:42 AM

shoulda got a sct

CutterWolf · 12-24-2008, 06:45 AM

Codes:
P605=Keep alive memory test failure

p607=MIL O/P ciruit malfunction

p1000=Check of all OBDII systems not complete

illin · 12-24-2008, 09:09 AM

Quote:

Originally Posted by rford426

shoulda got a sct

Very helpful post. Great contribution.

To the OP, once you get your version and model veriefied, check the Diablo forum and you will find half a dozen email addresses of their techs. It may be tough to get them today...but any normal day they reply in a few mins. You also may find what you are looking for on their forum.