limp mode... help please

[slricha4]

so im driving on the interstate in 5th and start to pull up a hill and the car dies. says failsafe mode on my dash but no check engine lights or anything. wouldnt crank. i wait and scan it with my sct and get nothing. it cranked up after about 5 min and i was able to drive it home but i noticed it was taking a while to get the car reved up. my buddy has a generic obd 2 scanner and he scanned the car. it threw 4 pending codes even though there was still no cel's or anything. the codes are p0446-Evaporative Emission System Vent Control Circuit p061B-torq calculation performance p151A-cmcv delete plates p2106-Throttle Actuator Control System - Forced Limited Power i found what the codes mean but i dont know how to fix them. anyone have any insight? thanks in advance. i should add that i have been running my bamachips tune for about a year now and never had problems. thanks

This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!

[avengence]

http://allfordmustangs.com/forums/20...lfunction.html

Sounds like the evap canister needs to be replaced according to the guy who replaced his himself. Its probably either plugged or the solenoid is bad.