Gas gauge doesn't work sometimes and other issue - Page 3

Lethaldosage423 · 10-20-2009, 06:31 PM

My shifter did the same thing when i got the car.

turn the car to on but dont start her
apply the Emergency brake
shift all the way to 1

use a flatblade screwdriver to pull up the plastic trim round the sifter, DONT SCRATCH IT

use tweezers to pull the black part down from the top
mine sat nicley in a small divot in the shifter so while it was there i got some superglue and stuck it down

i did this when i got the car in Jan 08 and its still in tact and i use my gears all the time and it hasnt pulled off

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!

JOHNNY · 10-20-2009, 06:33 PM

Their a guy on e bay that sells the update steeper motors with instuctions, or ford will sell you a new inst. cluster aprox 300.00. Alot off speedo repair shop know of this they want around 145.00 here in Fl. to fix it.

sanders4617 · 10-21-2009, 11:29 PM

So if I buy that.. I then get someone to install it? I doubt I could do that stuff. You said people in FL are charging around $150?