You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Then swap that TR3650 trans for a TR6060 six speed. World beater for <10g in investment. Just have some money set aside for a built shortblock when the rods give.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
__________________
2007 Alloy GT Coupe/MGW shifter/C&L Racer CAI/JBA LT's/JBA catted H/Pypes M-80 race mufflers/Steeda HD engine mounts/LFP 17# driveshaft/FRPP 4.10s/Truetrac/Steeda Ultralite 18x9.5's with 275/40 and 285/40 Nitto NT555/Autometer DPSS shift light and gauges. Suspension: Steeda Comp Springs/GT500 Front CA's with Steeda X5 balljoints/Steeda bumpsteer kit/Tokico D-Specs/BMR adj upper & lower LCAs+relocation brackets/Hotchkis 3/4way adj swaybars/UMI Performance panhard.
only at very fast ?? because i heard the most power at the end and saleen give the power the same all the time....
if you're racing somebody you're going "very fast" anyway. if your not racing somebody who cares how your car runs? 300whp is plenty with the right gearing.
__________________
2007 Alloy GT Coupe/MGW shifter/C&L Racer CAI/JBA LT's/JBA catted H/Pypes M-80 race mufflers/Steeda HD engine mounts/LFP 17# driveshaft/FRPP 4.10s/Truetrac/Steeda Ultralite 18x9.5's with 275/40 and 285/40 Nitto NT555/Autometer DPSS shift light and gauges. Suspension: Steeda Comp Springs/GT500 Front CA's with Steeda X5 balljoints/Steeda bumpsteer kit/Tokico D-Specs/BMR adj upper & lower LCAs+relocation brackets/Hotchkis 3/4way adj swaybars/UMI Performance panhard.
that is good news, didn't knew that,
yes i want to beat those eurpean cars!!! please helpme where i can but those things..
i have bought already an large amount of money for my car ,bilstein kit boykit etc
but where can i but buy those cams and you talk about drivetrain you mean gears...is that not bad for an automatic...
It depends on your driving style. How are the roads there? Smooth, slick etc? Where do you plan to "race" folks and what's the maximum speed limit? It sounds cold, ice etc. You will embarass everyone in the slick stuff/ice with your current setup from 0-60mph and the right suspension/tire/rearend setup.
I hear Netherlands and think cold, slick, ice lol.
And don't order a supercharger "tomorrow". Lots to learn first.
__________________
2007 Alloy GT Coupe/MGW shifter/C&L Racer CAI/JBA LT's/JBA catted H/Pypes M-80 race mufflers/Steeda HD engine mounts/LFP 17# driveshaft/FRPP 4.10s/Truetrac/Steeda Ultralite 18x9.5's with 275/40 and 285/40 Nitto NT555/Autometer DPSS shift light and gauges. Suspension: Steeda Comp Springs/GT500 Front CA's with Steeda X5 balljoints/Steeda bumpsteer kit/Tokico D-Specs/BMR adj upper & lower LCAs+relocation brackets/Hotchkis 3/4way adj swaybars/UMI Performance panhard.
Last edited by Rubrignitz; 10-20-2009 at 08:46 PM.
haha not always gold ,small streets and i am not a much of a racer but when i must push car i will need the power so exactly i was planning to buy tomorrow the vortec high output.....but everybody say buy saleen...
I know what you're trying to explain and a higher rpm setup with centrifugal supercharger will suit you nicely. The Vortech HO is VERY nice. Then add blower cams with aftermarket springs/retainers so you have 7k rpm ability and you're out breathing most on the street. This is important. The 3V heads will flow nearly what 4V heads flow and your valvetrain (springs/retainers) along with appropriate camshafts become the limiting factor to the 7k+ rpm powerband.
After having FRPP hotrod cams in my car for 2 years, I'd rather out-breath/rpm the others than have more hp/tq. that's what matters in a race. these cars are rolling bricks and the high rpm hp is what wins races.
__________________
2007 Alloy GT Coupe/MGW shifter/C&L Racer CAI/JBA LT's/JBA catted H/Pypes M-80 race mufflers/Steeda HD engine mounts/LFP 17# driveshaft/FRPP 4.10s/Truetrac/Steeda Ultralite 18x9.5's with 275/40 and 285/40 Nitto NT555/Autometer DPSS shift light and gauges. Suspension: Steeda Comp Springs/GT500 Front CA's with Steeda X5 balljoints/Steeda bumpsteer kit/Tokico D-Specs/BMR adj upper & lower LCAs+relocation brackets/Hotchkis 3/4way adj swaybars/UMI Performance panhard.
Last edited by Rubrignitz; 10-20-2009 at 09:04 PM.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company