You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I gave Livernois every chance to make things right before I told anyone anything but the clock has ran out so I might as well share my story of some seriously screwed up business dealings...
For those that don't know, I got a set of their type 'R' racing heads. These were supposed to be the 'best of the best' in heads. These things cost me 3 thousand dollars ON TOP of me giving them back a perfectly good set of their stage 3 heads so I am into these heads for a whopping 6 thousand dollars.
At the time I got the heads, there were some claims being made about Livernois fudging flow numbers and I went out and had the heads flow tested at my own expense to help Livernois out and, admittedly, give myself some piece of mind.
On ininitial startup, it was discovered that the drivers side cam which was a 'special' Livernois grind brand new from comp was bent. This is at startup, brand new heads and cams. I sent the cams back to Livernois and after 2 months, I finally got word from them that comp agreed the cam was bent and warrantied them and gave me a new set of cam shafts.
During this time, I pulled the heads completely and had them inspected. Turns out they were damn near destroyed at startup from the bent cam. The drivers side is complete trash and the passenger side is maybe good for a salvage for some parts at best.
This is the last email I received from Mike Schropp where he acknowledges the damage from the bent cam they sent me with the brand new heads...
Quote:
On our end we would probably not easily be able to sell them. We try to not deal anything that is not a first hand item just because it avoids any possible complications. I would agree that the bent cam probably did a fair amount of that damage and caused that head to go south quick.
At this point though I don’t see how we could repair the damage to the one head because of how extensive the cam tower damage is. The galling and aluminum damage is pretty bad. So it seems as that only really leaves us with one good head. We could take that one head that is good and just clean it up and some basic freshen up stuff on it so you could sell it. On the other bad head however I would say we could salvage the parts used in it but we would need to go through and do another casting up to match the good head.
Is this something that you would want to do?
Thanks
Mike
I'm sorry, but as I replied to him, 'ARE YOU FRIGGIN' KIDDING ME?'
So I am out 6 thousand dollars on a set of heads that came screwed up and got 2 minutes of use out of them. Heads that were already acknowledged to have a bent cam from day one (that nobody seemed to catch mind you) and I am just OUT OF LUCK? I'm not even mentioning the fact the bent cam also cost me a 12 thousand dollar motor.
Friggin' ridiculous...
My biggest regret over the years is not just shelling out the money in the first place and going with JPC/RGR from day one. I would have saved a ton in the end. I will not let anyone but Rich Groh or Justin Burcham ever touch my car again...
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
__________________
05 Sonic Blue Roush GT - 9.67 @ 141 Daily Driver!
On the cover and featured in the Dec. 09 MM&FF - Check it out!!
Thanks but the reality is when dealing with 'aftermarket' parts - you are pretty much screwed if anything goes wrong - even something as blatant as F'ed up crap from get go.
Sucks - but the way it is...
__________________
05 Sonic Blue Roush GT - 9.67 @ 141 Daily Driver!
On the cover and featured in the Dec. 09 MM&FF - Check it out!!
What pisses me off is I understand that it is not really Livernois 'fault' that comp supplied them a ****ed up camshaft.
What gets me is that I don't have any leverage at all with comp but Livernois does - they purchase tons of parts from them every year and have a much greater chance of holding them accountable than I ever would. However, I'm just out of luck. It surely wasn't MY fault that the heads were screwed up from day one yet I have to be out 18 grand.
It's a travesty.
__________________
05 Sonic Blue Roush GT - 9.67 @ 141 Daily Driver!
On the cover and featured in the Dec. 09 MM&FF - Check it out!!
Your best option is to file a claim in civil court against Comp and see if it can help you recover some or all of the money for the heads and engine damaged by the bent cam they sold you.
I don't see where they are refusing to replace the heads at their cost...??? My response to him would've have been "That sounds fine if that mean that Livernois is covering the cost of replacing the damaged heads?"
That's what you really need to ask. All I see is inference. THey haven't refused anything and you haven't point blank asked. The situation sucks but I don't see the fuss on what you're saying at this point. If I don't see it, a judge won't either.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
You may change your opinion of Livernois...
