Rotorpros Cross-Drilled/Gas Slotted rotors install (w/pics)
#21
RE: Rotorpros Cross-Drilled/Gas Slotted rotors install (w/pics)
Well got mine installed today, Wasn't gonna do it for a year or two but my Brother got them for me as a house warming gift, That was so cool!!!! Wife didn't think so but hey, "whatcha gonna do brother?" Took about an hour and 15 min to do them easy just like Senior Taco Bill said, I also painted the center hubs of mine red with rotor paint last night looks awesome, will post pics soon
#27
RE: Rotorpros Cross-Drilled/Gas Slotted rotors install (w/pics)
Hey Tacobill et.al...
I live in Puerto Rico, where it's obviously very humid. My rotors get a rusty hue almost every day before I drive my '06 GT. I know, I know. Nasty. anyway, I'm thinking about getting some of these rotors from rotorpros, but I'm wondering if the zinc plating really is DEEP. So, any of you who have had them for a length of time, how are they holding up? Still shiny? Or has the Zinc plating been worn down?
Muchas Gracias for your help!
I live in Puerto Rico, where it's obviously very humid. My rotors get a rusty hue almost every day before I drive my '06 GT. I know, I know. Nasty. anyway, I'm thinking about getting some of these rotors from rotorpros, but I'm wondering if the zinc plating really is DEEP. So, any of you who have had them for a length of time, how are they holding up? Still shiny? Or has the Zinc plating been worn down?
Muchas Gracias for your help!
#29
RE: Rotorpros Cross-Drilled/Gas Slotted rotors install (w/pics)
ORIGINAL: Toad
So, any of you who have had them for a length of time, how are they holding up? Still shiny? Or has the Zinc plating been worn down?
So, any of you who have had them for a length of time, how are they holding up? Still shiny? Or has the Zinc plating been worn down?
I havea friend in Florida running these Rotorpros and his rotors started to accumulate some surface rust in areas where the pad doesn't contact. He ended up spraying his rotors flat black (entire surface including the center vanes) and then took it out for a short drive. The brake pad areawiped clean and everywhere else is black.
#30
RE: Rotorpros Cross-Drilled/Gas Slotted rotors install (w/pics)
Check this thread. A little lengthy but worth a read. https://mustangforums.com/m_2547493/tm.htm