gt 500 front spoiler with pics
#1
gt 500 front spoiler with pics
Here is the gt500 spoiler on my car. It wasn't as hard to cut and intstall as I thought. I think it looks pretty good and was a very inexpensive mod. The only thing with my car being lowered makes it sit low. I have'nt scrubbed to bad (knock on wood).
From the front
From the side.
From the front
From the side.
#5
RE: gt 500 front spoiler with pics
I just finished my install too! along with my clear corners. was a piece of cake. i actually did all the cutting and sanding yesterday and bolted it on a while ago. it was too dark to take pictures though. i'll post mine up tomorrow when i get a chance. mine didn't have the gap in the bottom like yours though. i bolted some nuts and bolts with washers along the bottom for a flush fit. looks good for a cheap mod. and the clear corners look good on my car too.
#7
RE: gt 500 front spoiler with pics
you can buy some black push pins the same size as the holes that fit flush, and they won't
be as noticeable, also the raised tap in the center canbe trimmed flush with a razor blade and
glued down flush with the spoiler, I also moulded a cap to cover the center opening where the honey comb reinforcement was exposed.
be as noticeable, also the raised tap in the center canbe trimmed flush with a razor blade and
glued down flush with the spoiler, I also moulded a cap to cover the center opening where the honey comb reinforcement was exposed.
#9
RE: gt 500 front spoiler with pics
ORIGINAL: rubah_dmb
i just dont like the holes where the fascia does not reach the splitter...
i just dont like the holes where the fascia does not reach the splitter...