Front speakers don't work
10-31-2007, 01:52 PM
#12
1st Gear Member
Join Date: May 2007
Location: KY
Posts: 131
RE: Front speakers don't work
Actually the speaker in the door is a woofer not a subwoofer there is a difference. Its set up like a component system. I believe the shaker 1000 has a sub in the trunk. Not sure though mines just a 500.
10-31-2007, 02:33 PM
#13
Thread Starter
Join Date: Aug 2007
Posts: 28
RE: Front speakers don't work
Shaker is ON. But no sound trough the door woofers.
Do I need to check for more fuses then these mentioned above?
Greetz
Under the hood I can check
- fuse 6 (shaker 1000 radio)
- fuse 9 (shaker 1000 amp)
- fuse 16(shaker 500) - does this one exist? in a shaker1000?
- fuse 6 (shaker 1000 radio)
- fuse 9 (shaker 1000 amp)
- fuse 16(shaker 500) - does this one exist? in a shaker1000?
Greetz
10-31-2007, 02:39 PM
#14
4th Gear Member
Join Date: May 2006
Location: Norfolk, VA
Posts: 1,412
RE: Front speakers don't work
ORIGINAL: deweirdt
Well that was also my guess. But I don't know what fuses to check.
Under the hood I can check
- fuse 6 (shaker 1000 radio)
- fuse 9 (shaker 1000 amp)
- fuse 16(shaker 500) - does this one exist? in a shaker1000?
What others do I need to check?
Can you tell me where the one is on the passenger compartment? This because I don't understand what "kick panel" is (yeah my language is not English, in the case you should haven't noticed
)
Greetz PJ
Well that was also my guess. But I don't know what fuses to check.
Under the hood I can check
- fuse 6 (shaker 1000 radio)
- fuse 9 (shaker 1000 amp)
- fuse 16(shaker 500) - does this one exist? in a shaker1000?
What others do I need to check?
Can you tell me where the one is on the passenger compartment? This because I don't understand what "kick panel" is (yeah my language is not English, in the case you should haven't noticed
)Greetz PJ
10-31-2007, 02:54 PM
#15
1st Gear Member
Join Date: May 2007
Location: KY
Posts: 131
RE: Front speakers don't work
Fuse 16 under the hood should be the one you need. It's in the lower right corner.If its "doesn't exist" it should. Put a 30amp in there. That fuse goes to the 2 small amps to the speakers you're talking about.
10-31-2007, 03:41 PM
#16
Thread Starter
Join Date: Aug 2007
Posts: 28
RE: Front speakers don't work
Fuse 16 under the hood should be the one you need. It's in the lower right corner. If its "doesn't exist" it should. Put a 30amp in there. That fuse goes to the 2 small amps to the speakers you're talking about.
Let me try to explain witch once.
Check this picture: http://pjdeweirdt.desneppe.be:8080/speakers.gif
The round once are the once that are not working. The once built-in (on top) are working fine.
Greetz
11-01-2007, 05:03 AM
#17
Thread Starter
Join Date: Aug 2007
Posts: 28
RE: Front speakers don't work
Ok guys,
Good and Bad news:
First I checked the fuse 16: This one seems to be fine I measured the fuse and the current is going trough (measured with Ohm meter)
The bad new is that when I unplug the fuse and then turn on the radio then there is no difference like there is with a fuse.
I swapped the fuse 7 (left power window) with the 16 and same result. Speakers in front (round once) are not working.
Who can give me another suggestion?
greetz
Good and Bad news:
First I checked the fuse 16: This one seems to be fine I measured the fuse and the current is going trough (measured with Ohm meter)
The bad new is that when I unplug the fuse and then turn on the radio then there is no difference like there is with a fuse.
I swapped the fuse 7 (left power window) with the 16 and same result. Speakers in front (round once) are not working.
Who can give me another suggestion?
greetz
11-01-2007, 07:29 AM
#18
3rd Gear Member
Join Date: Dec 2006
Location: Nashville, TN
Posts: 535
RE: Front speakers don't work
Any chance the speakers are unplugged? Youhave toremove the door panel to check.
Also, I set the HPF on my aftermarket headunit to 100Hz and don't hear any sound from those speakers unless it's pretty harsh bass...not sure if you can do that with the stock Shaker 1000??
Also, I set the HPF on my aftermarket headunit to 100Hz and don't hear any sound from those speakers unless it's pretty harsh bass...not sure if you can do that with the stock Shaker 1000??
11-01-2007, 07:32 AM
#19
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
RE: Front speakers don't work
deweirdt, if you want i can email you the
audio system trouble shooting manual (415-00-23).
it is very detailed and has measuring points.
basically, if all your fuses are good....
a) subwoofer amps
b) wiring between subwoofer amps and speakers
c) speakers
audio system trouble shooting manual (415-00-23).
it is very detailed and has measuring points.
basically, if all your fuses are good....
a) subwoofer amps
b) wiring between subwoofer amps and speakers
c) speakers
11-01-2007, 07:39 AM
#20
Thread Starter
Join Date: Aug 2007
Posts: 28
RE: Front speakers don't work
deweirdt, if you want i can email you the
audio system trouble shooting manual (415-00-23).
it is very detailed and has measuring points.
basically, if all your fuses are good....
a) subwoofer amps
b) wiring between subwoofer amps and speakers
c) speakers
audio system trouble shooting manual (415-00-23).
it is very detailed and has measuring points.
basically, if all your fuses are good....
a) subwoofer amps
b) wiring between subwoofer amps and speakers
c) speakers
Hammeron,
Yeah that would be nice. You can certainly mail me this my email is deweirdt@gmail.com
Any help is usefull.