Chin Spoiler & Lowered? Pics, issues?
#11
RE: Chin Spoiler & Lowered? Pics, issues?
I'm lowered -- with a CDC Aggresive -- & a front Carbon Fiber Diffuser. I will def scrap which is part of the reason that I had the diffuser made... when I had just the chin I would scrape if I wasn't careful. I had my chin painted twice due to bad scrapes and chips. I ended up painting it again (3rd time[:@] ) added the clear bra, & diffuser... no prblems since . I take every bump/ pot hole/ angle driveways/ etc (that I can see or avoid) at an angle as well. I have scraped the Carbon Fiber twice underneath but there is also a sheild attached below it so it's fine.
[img][/img]
[img][/img]
#13
RE: Chin Spoiler & Lowered? Pics, issues?
No not yet -- we sold the templates for the Aggressive and Street Scene at SEMA -- those 2 should be released here soon. I know that we are going to make one for the classic but I'm unsure as to how soon. I'll make a phone call and PM you here in a few ~ J
ORIGINAL: tungstenstang
do they make a diffuser for the classic?
do they make a diffuser for the classic?
#14
RE: Chin Spoiler & Lowered? Pics, issues?
ORIGINAL: oi8achevy
gt500 chin spoiler stock hieght and i scape on some entrance ways probably while ill never lower permanantly. ny roads suck. ive looked at the new airride setup and that is impressive and expensive but i like being able to road trip anywhere with the stang. ive had a few lowered cars and it sucks to always worry about bottoming out.
[IMG]local://upfiles/68278/C319DAE9051C4131A881A0B0BD165A8B.jpg[/IMG]
gt500 chin spoiler stock hieght and i scape on some entrance ways probably while ill never lower permanantly. ny roads suck. ive looked at the new airride setup and that is impressive and expensive but i like being able to road trip anywhere with the stang. ive had a few lowered cars and it sucks to always worry about bottoming out.
[IMG]local://upfiles/68278/C319DAE9051C4131A881A0B0BD165A8B.jpg[/IMG]
#16
RE: Chin Spoiler & Lowered? Pics, issues?
I've got the Legend chin spoiler with a stock suspension. I've scraped twice coming out of my driveway to fast and put it over a curb once pulling into a parking spot, but you can't see any scrapes because they all show on the bottom of the lip.
[IMG]local://upfiles/52034/7FAE5E2E4D2C42E98A2A6F600580AFA6.jpg[/IMG]
[IMG]local://upfiles/52034/CD23FE0478D1495393B050C0B5ACD034.jpg[/IMG]
[IMG]local://upfiles/52034/425A74BEE5AE402BBDE4372B8FAC4C09.jpg[/IMG]
[IMG]local://upfiles/52034/88F3566B9E4B420DB44D1DB7D80E8167.jpg[/IMG]
[IMG]local://upfiles/52034/7FAE5E2E4D2C42E98A2A6F600580AFA6.jpg[/IMG]
[IMG]local://upfiles/52034/CD23FE0478D1495393B050C0B5ACD034.jpg[/IMG]
[IMG]local://upfiles/52034/425A74BEE5AE402BBDE4372B8FAC4C09.jpg[/IMG]
[IMG]local://upfiles/52034/88F3566B9E4B420DB44D1DB7D80E8167.jpg[/IMG]
#17
Search function = great
I have a CDC classic chin (painted) on the way, and I'm looking to buy some lowering springs from a MF member. The springs I'm buying will give me a .75" drop in the front and a 1" drop in the rear. Will I have significant clearance issues? I really want to pull the trigger on the springs and reloc brackets, adj UCA and adj PHB. Will I be ok?
I have a CDC classic chin (painted) on the way, and I'm looking to buy some lowering springs from a MF member. The springs I'm buying will give me a .75" drop in the front and a 1" drop in the rear. Will I have significant clearance issues? I really want to pull the trigger on the springs and reloc brackets, adj UCA and adj PHB. Will I be ok?
Thread
Thread Starter
Forum
Replies
Last Post
zanemoseley
2005-2014 Mustangs
6
09-06-2015 12:58 PM