Drive shaft and fluidyne radiator installed
#1
Drive shaft and fluidyne radiator installed
So I have had the radiator for around 6 months. Brenspeed sold them for around 250 I believe. I had them do the work along with a drive shaft that was used but looked like its never been underneathe a car. I picked that up for 600 which I thought was a ok deal.
I don't have any real reviews of either as of now. It's been raining here so I cant really tell you what I think of the DS. And the radiator well that will have to wait till spring or summer at the track. Brent did tell me he typically sees about 210 ( on the dyno) on the temp and with the fluidyne he sees around 180 190.
To be honest I can't tell anything has changed the car which is a good thing seeing how these mods are more for precaution.
I am going to install white line rear and front sway bars this week
I don't have any real reviews of either as of now. It's been raining here so I cant really tell you what I think of the DS. And the radiator well that will have to wait till spring or summer at the track. Brent did tell me he typically sees about 210 ( on the dyno) on the temp and with the fluidyne he sees around 180 190.
To be honest I can't tell anything has changed the car which is a good thing seeing how these mods are more for precaution.
I am going to install white line rear and front sway bars this week
Last edited by outceltj; 01-30-2013 at 12:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Gary Ugarek
4.6L (1996-2004 Modular) Mustang
63
12-11-2015 02:01 PM
DrunknRuckus
4.6L (1996-2004 Modular) Mustang
5
08-23-2015 10:05 AM