Gt500 Pump installed- Fuel Gauge error
#12
Here is my experience with that problem.
#13
I put on a catted midpipe and load my tune that has the O2 sensors turned back on. Drive for a day, pass the test, get my sticker, switch bad to the offroad setup for another 364 days.
#14
My setup looks pretty much like this pic from the how to's in this forum. red and black left hanging. The only difference is that the wires from the new harness to the modified connector are the LG and LB instead of Black and pink as they seem to be in this picture.
http://i172.photobucket.com/albums/w...all/d055-1.jpg
http://i172.photobucket.com/albums/w...all/d055-1.jpg
that fat hand looks very familiar. i had the same problem and it was the wires and th connector, triple check the connector and make sure the wires are the correct ones.
#15
Problem Solved!
You are right. The problem was on the modified connector. I had not removed the blue lock from the front so when I inserted the two wires (correct order but...) they never locked into position, thus there was no contact.... I disassembled and reassembled the connector correctly and presto. everything works...
Moral of the story... Never do electrical work that you are not familiar with in the dark.
Moral of the story... Never do electrical work that you are not familiar with in the dark.
Last edited by vasman; 08-19-2009 at 09:39 PM.
#18
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
zanemoseley
2005-2014 Mustangs
6
09-06-2015 12:58 PM