Hoodpins Installed - Slight Twist from normal
10-12-2009, 05:14 PM
#1
5th Gear Member
Thread Starter
Join Date: Feb 2007
Location: Hawaii
Posts: 2,211
Hoodpins Installed - Slight Twist from normal
Finally did the install.Then had them engraved with my car Build #6451, and the Bullitt logo.
Cost me about $150 all said and done.
Install was really easy. Just bolt the radiator brace up, and do some drilling. I'm overall pretty satisfied with everything. Kinda annoyed at the engraver though. I was intending to fill in the lettering with black paint, but he didn't do the lettering deep enough. So the letters are only partly filled in for now.
Still, came out pretty nicely IMO
next up: 30% tint, SHR Louvers, GT500 Front End conversion
$105 shipped for the hoodpins
$19 for the engraving
$25 for the Bi-Metal Hole saw and some aluminum hardware
$19 for the engraving
$25 for the Bi-Metal Hole saw and some aluminum hardware
Install was really easy. Just bolt the radiator brace up, and do some drilling. I'm overall pretty satisfied with everything. Kinda annoyed at the engraver though. I was intending to fill in the lettering with black paint, but he didn't do the lettering deep enough. So the letters are only partly filled in for now.
Still, came out pretty nicely IMO
next up: 30% tint, SHR Louvers, GT500 Front End conversion
10-12-2009, 05:49 PM
#3
2nd Gear Member
Join Date: Mar 2008
Location: Texas
Posts: 266
nice!
i have hood pins also but i decided to take off the lanyards and i think is a much cleaner look to go with my car..
i dont see the point in the engraving if you plan to put a different cars front end....
i have hood pins also but i decided to take off the lanyards and i think is a much cleaner look to go with my car..
i dont see the point in the engraving if you plan to put a different cars front end....
Last edited by BaDStAnGT; 10-12-2009 at 05:55 PM.
10-12-2009, 09:35 PM
#10
5th Gear Member
Thread Starter
Join Date: Feb 2007
Location: Hawaii
Posts: 2,211