I hate Pypes
06-29-2010, 07:29 PM
#1
4th Gear Member
Thread Starter
Join Date: Jun 2009
Location: WA / TX
Posts: 1,085
I hate Pypes
Alright. So I just bought some Pypes Violators. Why did I buy such a crappy exhaust? Well, I had Pypes midpipes and stock mufflers. I don't have my stock midpipes because I had them cut because a previous exhaust was welded to them. Everything is simple now. Stock mufflers, and Pypes midpipe.
So the Pypes midpipe is advertised to fit a stock Mustang GT. Well, it sure as **** doesn't. The over axle section rubs on the body of the car and the axle more than a stripper on a bachelor's knee. The Pypes midpipe is also TOO LONG to use with stock mufflers. It makes the stock tips stick out well past the bumper. Absolute garbage. So I bought some used Pypes Violators thinking perhaps even Pypes own products will fit correctly with their ****ty midpipe right?
Oh hell no. The Violators won't slip over the ends of the midpipe! They're BOTH Pypes products! Why don't they even fit each other? I've never seen such ****ty, poorly made garbage in my life and I've been modding cars for about eight years. I know all of this crap can be fixed at an exhaust shop but it's advertised to FIT MY CAR and it doesn't. The discounted price of Pypes products doesn't even matter because you lose the difference when you have to pay a muffler shop to un**** whatever Pypes sends you.
Mr. Pypes, if you post on this forum, your products ****ing suck. Are you asleep when you design this ****? Are you distracted? Are you being attacked by ninjas when measuring and cutting exhaust piping? What the hell is wrong with you?
So the Pypes midpipe is advertised to fit a stock Mustang GT. Well, it sure as **** doesn't. The over axle section rubs on the body of the car and the axle more than a stripper on a bachelor's knee. The Pypes midpipe is also TOO LONG to use with stock mufflers. It makes the stock tips stick out well past the bumper. Absolute garbage. So I bought some used Pypes Violators thinking perhaps even Pypes own products will fit correctly with their ****ty midpipe right?
Oh hell no. The Violators won't slip over the ends of the midpipe! They're BOTH Pypes products! Why don't they even fit each other? I've never seen such ****ty, poorly made garbage in my life and I've been modding cars for about eight years. I know all of this crap can be fixed at an exhaust shop but it's advertised to FIT MY CAR and it doesn't. The discounted price of Pypes products doesn't even matter because you lose the difference when you have to pay a muffler shop to un**** whatever Pypes sends you.
Mr. Pypes, if you post on this forum, your products ****ing suck. Are you asleep when you design this ****? Are you distracted? Are you being attacked by ninjas when measuring and cutting exhaust piping? What the hell is wrong with you?
06-29-2010, 08:31 PM
#5
4th Gear Member
Thread Starter
Join Date: Jun 2009
Location: WA / TX
Posts: 1,085
.
06-30-2010, 05:06 AM
#10
5th Gear Member
Join Date: Feb 2007
Location: Hawaii
Posts: 2,211
it's not just Pypes. they just seem to have it occur 9/10 times.
I had similar issues with my Magnapacks. Had to resolve the issue with a torch, big *** hammer, and a sawzall. Magnaflow wanted me to have a shop make it fit and they'd cover 1/2 the cost.
how does it sound?
I had similar issues with my Magnapacks. Had to resolve the issue with a torch, big *** hammer, and a sawzall. Magnaflow wanted me to have a shop make it fit and they'd cover 1/2 the cost.
how does it sound?