Lower Control Arms and Relocation Bracket Brands...
#1
Lower Control Arms and Relocation Bracket Brands...
So my baby (12 GT) is doing some hopping since she was lowered and my buddy (the previous owner) and I think it could be the lower control arm not putting enough pressure on the tires. So I figure it's a good time to upgrade.
Anyone have any ideas on brands? I have been looking at steeda...
http://www.americanmuscle.com/steeda...ical-0513.html
http://www.americanmuscle.com/steeda...cket-0513.html
Anyone have any ideas on brands? I have been looking at steeda...
http://www.americanmuscle.com/steeda...ical-0513.html
http://www.americanmuscle.com/steeda...cket-0513.html
#3
So my baby (12 GT) is doing some hopping since she was lowered and my buddy (the previous owner) and I think it could be the lower control arm not putting enough pressure on the tires. So I figure it's a good time to upgrade.
Anyone have any ideas on brands? I have been looking at steeda...
http://www.americanmuscle.com/steeda...ical-0513.html
http://www.americanmuscle.com/steeda...cket-0513.html
Anyone have any ideas on brands? I have been looking at steeda...
http://www.americanmuscle.com/steeda...ical-0513.html
http://www.americanmuscle.com/steeda...cket-0513.html
I also suggest replacing the Upper Control Arm as well. To retain the factory suspension geometry that was lost when the ride was lowered. This should help with the wheel hop, in addition to your LCA's. As well as provide the correct pinion angle for the driveshaft again.
Hope this helps! Hit me up if there's anything else I can do.
Shane
Thread
Thread Starter
Forum
Replies
Last Post