BC RACING coilover install
03-21-2011, 01:37 AM
#1
3rd Gear Member
Thread Starter
Join Date: Sep 2009
Location: Cali
Posts: 702
BC RACING coilover install
I put in my BC Racing coilovers, BMR rod ended PHB and the brace, the other day, after having ridden in peetie wonders car i was convinced that i needed a set. Here are some pics from the install. I can literally go so low that the car will not be driveable. I will get better pics once it stops raining here.
How the car is sitting as of now.
During the install
Before
Slammed
How the car is sitting as of now.
During the install
Before
Slammed
03-22-2011, 01:04 AM
#6
3rd Gear Member
Thread Starter
Join Date: Sep 2009
Location: Cali
Posts: 702
called them directly and talked to Mike. Very helpful guy and got them to me on the other side of the country in 5 days. I was very satisfied with them.
Except when you go to do the rear shocks you need to reuse the stock rubber spacers from your stock shocks. I took us a while to figure it out since there is nothing in the directions about it.
Except when you go to do the rear shocks you need to reuse the stock rubber spacers from your stock shocks. I took us a while to figure it out since there is nothing in the directions about it.
04-07-2011, 02:13 PM
#9
3rd Gear Member
Thread Starter
Join Date: Sep 2009
Location: Cali
Posts: 702
Thanks man i really apreciate it. Im going to take so GOOD pics pretty soon here. I will post them up after!
