Installed sway bars/bushings on my 07 v6 convertible.
#1
Installed sway bars/bushings on my 07 v6 convertible.
I installed my front and rear GT take off sway bars on my 2007 v6 convertible along with Prothane bushings. I didn't like how the white links looked on the rear bar so I painted them red to match my torch red mustang. What do you think?
Also, I wanted to thank everyone for their help. To clarify for all the other v6 convertible owners out there. The GT rear sway bar is a different thickness than the coupes. The vert bar is 18mm and the coupe is 20mm. If you decide to install polyurethane bushings like I did make sure you have a large bench vise. They are a PAIN to get in the links and it may take you some time but be patient, you'll get it... eventually.
Also, I wanted to thank everyone for their help. To clarify for all the other v6 convertible owners out there. The GT rear sway bar is a different thickness than the coupes. The vert bar is 18mm and the coupe is 20mm. If you decide to install polyurethane bushings like I did make sure you have a large bench vise. They are a PAIN to get in the links and it may take you some time but be patient, you'll get it... eventually.
#5
Thread
Thread Starter
Forum
Replies
Last Post
foxtrot
North East
1
07-21-2007 06:36 PM
foxtrot
Archive - Want To Buy Ads
0
07-26-2005 11:09 PM