Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

Tuning and RWHP/RWTQ Guesses?

Old 05-14-2012, 03:49 PM
  #1  
Roush05
3rd Gear Member
Thread Starter
 
Roush05's Avatar
 
Join Date: Apr 2011
Location: Georgia
Posts: 986
Default Tuning and RWHP/RWTQ Guesses?

I have a lot of stuff going on to the car right now, and I am wondering if I should get a dyno tune. I have bama tunes already, so I am curious as to if a dyno tune from a good tuner would net me enough power to justify an extra $300-$400. Also, what do you guys think I can make with this setup? If everything goes perfectly, (it probably won't, but we'll see) I will have everything installed this week and be dynoed next week. My NA goal is 350 rwhp.

My setup will be:

Tune(either bama or dyno)
BBK Ceramic Long Tube Headers
BBK O/R Shorty X pipe
Steeda Underdrive Pulleys
Comp Cams NSR Stage 2 127200 Cams
4.10 gears
Roush CAI
Roush Axlebacks



Just trying to help pass the time until all the parts come in.

Last edited by Roush05; 05-14-2012 at 04:00 PM.
Roush05 is offline  
Old 05-14-2012, 04:30 PM
  #2  
2005Redfire6
6th Gear Member
 
2005Redfire6's Avatar
 
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,260
Default

You can get away with a bama tune for those mods, but to maximize the potential of all of those mods I'd get a dyno tune.
2005Redfire6 is offline  
Old 05-14-2012, 04:46 PM
  #3  
Roush05
3rd Gear Member
Thread Starter
 
Roush05's Avatar
 
Join Date: Apr 2011
Location: Georgia
Posts: 986
Default

That's halfway what I was expecting. I'll have to run the bama tune for a month or so while I save up for the dyno tune though.
Roush05 is offline  
Old 05-14-2012, 06:29 PM
  #4  
Nuke
6th Gear Member
 
Nuke's Avatar
 
Join Date: Jun 2007
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,182
Default

320-325 RWHP with a good AM tune, 330-335 with a really good dyno tune. I'd be all over the board with torque depending on the cams and the tune.
Nuke is offline  
Old 05-14-2012, 06:42 PM
  #5  
Roush05
3rd Gear Member
Thread Starter
 
Roush05's Avatar
 
Join Date: Apr 2011
Location: Georgia
Posts: 986
Default

What would I need to do to get to 350? CMDPs alone wouldn't do it, would they?
Roush05 is offline  
Old 05-14-2012, 06:48 PM
  #6  
Nuke
6th Gear Member
 
Nuke's Avatar
 
Join Date: Jun 2007
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,182
Default

Originally Posted by Roush05
What would I need to do to get to 350? CMDPs alone wouldn't do it, would they?
CMDP's won't and many peopple don't care for them. At this point, you're down to the nickle and dime mods; 5 RWHP here, 3 there...

Aluminum DS and lighter wheels will free-up a few more RWHP as will an electric water pump. With the cams, LT's and O/R X, you MAY see some gains with an aftermarket TB but beware; they can be a real pain getting them to function properly. Very few people reach the 350 RWHP mark without some additional internal work.
Nuke is offline  
Old 05-14-2012, 06:54 PM
  #7  
Roush05
3rd Gear Member
Thread Starter
 
Roush05's Avatar
 
Join Date: Apr 2011
Location: Georgia
Posts: 986
Default

I know of a couple places that I could get a gt500 TB and adapter for around $150. I want at least 340 RWHP but my goal for this car as a NA car is 350. Who knows, maybe my car is a freak and I'll be closer than I think with the mods I have now. lol.
Roush05 is offline  
Old 05-14-2012, 07:27 PM
  #8  
waykooljr
3rd Gear Member
 
waykooljr's Avatar
 
Join Date: Jun 2006
Location: Texas
Posts: 568
Default

Do you have an aluminum driveshaft? That'll get you more of your hp to the wheels.
waykooljr is offline  
Old 05-14-2012, 07:39 PM
  #9  
Roush05
3rd Gear Member
Thread Starter
 
Roush05's Avatar
 
Join Date: Apr 2011
Location: Georgia
Posts: 986
Default

No, not at the moment.
Roush05 is offline  
Old 05-14-2012, 08:30 PM
  #10  
2005Redfire6
6th Gear Member
 
2005Redfire6's Avatar
 
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,260
Default

Depends on the dyno type, and a lot of weather factors ect... As well.
2005Redfire6 is offline  

Thread Tools
Search this Thread
Quick Reply: Tuning and RWHP/RWTQ Guesses?



All times are GMT -5. The time now is 01:21 PM.