Black Headlight Tint
#11
two layers of ebay smoked vinyl fog lamps 1 layer was not enough
4300K HID fogs and OE hid head lamps
15 or 20% tinted head lamps by a tint guy (dealer did)
AM side marker vinyl
crappy LED side markers
plasti dip emblem
4300K HID fogs and OE hid head lamps
15 or 20% tinted head lamps by a tint guy (dealer did)
AM side marker vinyl
crappy LED side markers
plasti dip emblem
Last edited by 99gtstang; 01-17-2013 at 09:06 PM.
#12
Absolutely. I highly recommend Retro Solutions. The bulbs you will need are H13 (headlights) and H10 (fogs).
#13
99gtstang that Mustang is beautiful. I mean it is VERY nice. Can you elaborate more on the plasti dip horse? Did you just wet sand, prime, paint, clear and done? Forgive me I know nothing about paint haha.
#14
The horse comes out. Don't break the pins or lose the "rings" that hold the horse on. I removed the grill first to make it easy.
First I painted and put on a few layers of clear coat. Too shiny.
Plasti dip is very simple. Prep = clean it very well. No primer or sanding required. Spray several layers and take time in between. There's not really much to it. If you don't like you can peel off and try again. That's the nice part of plasti dip.
GTS; google that **** - watch some youtube videos first. Anyone can do it and like I said you can peel off if you do not like.
#15
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-25-2015 09:06 AM