MustangForums.com

MustangForums.com (http://mustangforums.com/forum/index.php)
-   2005 - 2014 Mustangs (http://mustangforums.com/forum/2005-2014-mustangs-43/)
-   -   Who is running over 10 pounds of boost on stock bottom end? (http://mustangforums.com/forum/2005-2014-mustangs/693891-who-is-running-over-10-pounds-of-boost-on-stock-bottom-end.html)

slickman 04-22-2013 04:30 PM

Has anyone ever gone from a 3.25 to a 3.00 pulley?
 
What gains dod you see going from a 3 1/4 to a 3 inch pulley on an E-Force?

jpplaw 04-22-2013 05:46 PM

I made 474 rwhp and 434 rwtq with an eforce 3.5 pulley, kooks, and detroit rocker cams on the stock bottom end. I never dyno'ed her with the 3.25. The 3.25 made me too nervous so I didn't run it very long.
I would not even chance the 3.0 pulley with the stock rods.

Not really a comparison - I do not have a stock bottom end anymore (plus I added 45 cid & ported FRPP Stage 1 heads) but I picked up around 100 rwhp & 150 rwtq using a 2.75 pulley (and still on the edelbrock 41lb inj).

slickman 04-22-2013 06:16 PM

I picked up a 3 inch pulley for $30. Just wondering how much it would Add over what i have now which is a 3.25

jpplaw 04-22-2013 08:54 PM

A 3.0 pulley would probably add 20-25 rwhp

2005Redfire6 04-22-2013 09:01 PM


Diabolical! 04-22-2013 09:22 PM

Quote:

Originally Posted by slickman (Post 8198963)
Who is running over 10 lbs of boost on a stock bottom end?

This guy.

2005Redfire6 04-22-2013 09:33 PM

Quote:

Originally Posted by Diabolical! (Post 8199228)
This guy.

I must admit if you are who I'm thinking of you are making over 500rwhp on the stock bottom end, I am surprised you haven't popped it.

slickman 04-22-2013 10:06 PM

Quote:

Originally Posted by Diabolical! (Post 8199228)
This guy.

Lol.....

07 GT E UPP 04-23-2013 04:45 AM

And me ( 11 PSI - 3.25" ) for past 4 1/2 years !!

slickman 04-23-2013 06:35 AM

Quote:

Originally Posted by 07 GT E UPP (Post 8199401)
And me ( 11 PSI - 3.25" ) for past 4 1/2 years !!

Those are some impressive numbers (538 RWHP/498 RWTQ).. what dyno was that done on?


All times are GMT -5. The time now is 01:15 AM.