do the 2010-2014 tail lights blink in sequence when you hit the brake?
#11
the 14's only sequence when the turn signal is used. my '06 had Chase lights from Meter4it shown here, which I loved. These lights on the 06 would sequence in when pressing the brake, all lights would hold steady lit while braking, and then sequence back out when releasing the brake pedal. Hazards would create a continues chase sequence, the part i loved.
I've been trying to see if anyone modified the '14 lights to chase just as Meter4it created. Sadly, I contacted Meter4it and they have no plans to make this mod. Any other electrical guys ready to accept the challenge?
I've been trying to see if anyone modified the '14 lights to chase just as Meter4it created. Sadly, I contacted Meter4it and they have no plans to make this mod. Any other electrical guys ready to accept the challenge?
#13
These taillights are actually going to be back in stock in the next two weeks. We'll finally have a solid inventory on this product! These don't Sequence when hitting the brakes. However, they do have built in Sequential taillights so they will Sequence when you turn on the turn signal.
I hope this helps! Definitely let me know if you have any questions or need some assistance in the near future.
-Dan
I hope this helps! Definitely let me know if you have any questions or need some assistance in the near future.
-Dan
u were also wrong when you said that they don't sequence during "brake" and "hazard".... I been looking for a job, should I just apply at the AM website?
Thread
Thread Starter
Forum
Replies
Last Post