2005 - 2014 MustangsDiscussions on the latest S197 model Mustangs from Ford.
Sponsored by Latemodel Restoration
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
just wanted to know if anyone has every try adding more ambient lights on your mustang. i have the stock ones and that change color but they don't standout that much. i wanted to add more light and somehow connect it all to the existing factory wiring. so basically i'm looking for a bulb or LEDs that change color just like my stock one so i can connect it all over my floor. i hope i'm making any sense here.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
Order a POD light for rgb led's off eBay. They have all the colors, will work with the factory system, but does not come with a plug. You have to add them into the harness but it is done very easily. I did it and love it. It is hooked into the controller wiring and I have them under the dash, since I didn't have factory ambient to start with. I added the console and extra bulbs and wiring from an Edge to give me more.
Like these or similar. Mine were a bit different, without the second wiring line, but this is an example.
THANK YOu GUYS! my question is with these light can i use my factory button that is located on my cup holder to change the colors? so that way my factory ambient light should sync with these after market LED. or do i really need to get a separate controller with these?
Last edited by BlackShelbyGt500; 04-30-2014 at 10:49 PM.
The answer is yes. They can be incorporated into the harness. They have 4 colored wires, exactly as the Ford ambient lights do, so splicing into or adding is very simple. Some led's work strange with the Ford systems, (backwards, if you know what I'm saying), but the pod's will work perfectly. With the factory ambient light switch. Just hook into the harness after the controller plug. It is better there. Good luck.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor