05 gt p0191 error code - MustangForums.com



2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

Reply
 
 
 
Thread Tools Search this Thread
Old 05-24-2014, 10:29 AM   #1
monera05
Thread Starter
 
Join Date: May 2013
Location: Ontario
Posts: 2
Default 05 gt p0191 error code

Hey guy's

Been posting on many forum in regards to my issue here
Before I take it into ford.
Issue is p0191, p1237 and the pump is constantly running with the key on (no engine start) but yes it turn off once key is off ,
as the chart below shows i'm seeing 75psi at the fuel rail, and pump is at 0.75 duty (150%?)

can anyone look at this data log and tell me if the pump seem to be bad , i see negative values at the pump, but the tables (pcm and fpdm) is giving positive voltage
Before i take it into ford just wanted some of y'all professional advise!

Thanks!

monera05 is offline   Reply With Quote
Old 05-24-2014, 10:57 AM   #2
moosestang
6th Gear Member
 
Join Date: Sep 2006
Location: Gainesville, FL
Posts: 11,278
Default

Does the car start? The pump runs and runs with the key on, engine off? It could be the fpdm or even the fuel pressure sensor
moosestang is offline   Reply With Quote
Old 05-24-2014, 11:23 AM   #3
moosestang
6th Gear Member
 
Join Date: Sep 2006
Location: Gainesville, FL
Posts: 11,278
Default

moosestang is offline   Reply With Quote
Old 05-25-2014, 08:59 AM   #4
monera05
Thread Starter
 
Join Date: May 2013
Location: Ontario
Posts: 2
Default

fpdm and fps have been replaced
car runs perfectly fine
monera05 is offline   Reply With Quote
Old 05-26-2014, 01:03 AM   #5
Simon1
5th Gear Member
 
Join Date: Dec 2006
Location: Redding, CA
Posts: 4,546
Default

Most of the twin pump set ups I've seen with issues usually come down to some type of wiring issue. Either bad ground or too small of wire. Just a guess.
Simon1 is offline   Reply With Quote
Old 05-26-2014, 04:17 PM   #6
moosestang
6th Gear Member
 
Join Date: Sep 2006
Location: Gainesville, FL
Posts: 11,278
Default

Quote:
Originally Posted by Simon1 View Post
Most of the twin pump set ups I've seen with issues usually come down to some type of wiring issue. Either bad ground or too small of wire. Just a guess.
He doesn't have a twin pump. If the fpdm and fps have been replaced, then that only leaves a short in the pump or a short in the wiring.
moosestang is offline   Reply With Quote
Old 10-16-2014, 01:11 AM   #7
drumhedd2005
 
Join Date: Oct 2012
Location: CA
Posts: 7
Default

Im having the opposite problem. I keep getting the same code on my 05' GT. The pump stays on for a second when i turn key on (normal) but it starts REALLY HARD. Other times it doesn't start hard. It idles perfectly normal with no backfiring or missing. I replaced the fuel pump in Sept 2012, fuel filter was replaced about 2000 miles ago, I cleaned the MAF sensor, replaced spark plugs, and also replaced the fuel rail sensor. The car hesitates sometimes when I press down on the gas (not jumping on it) which is triggering the code. Its almost as if something is causing the fuel pressure to "hiccup." Any ideas????????
drumhedd2005 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
TNT, New PB TCStangerv6 Street/Strip 12 10-11-2015 05:57 PM
I should've known better ChampInSD 5.0L GT S550 Tech 13 10-02-2015 04:55 AM
Please help! 10 Check engine codes mrtrodonet V6 (1994-2004) Mustangs 1 09-29-2015 11:13 AM
Clear codes on '94 sn95 BOB ROME 5.0L (1979-1995) Mustang 2 09-28-2015 11:10 AM
Patience is a virtue! 2007CalSpec Off Topic 14 09-26-2015 12:08 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 09:59 AM.