Little help reading datalogs
#1
Little help reading datalogs
I am attaching all my data logs, dated as they are with communication to BAMA. BAMA says there is an air leak, I am also attaching my leaktest I did, with the following: I sprayed each item approximately 15 second intervals. In this order:
just behind MAF, First CAI rubber joint, Second CAI rubber joint, TB, Inlet Elbow, Gear Case, Drvr Side S/C to Intake, Drvr Side fuel injectors, Drvr side intake to head, Vacuum bypass valve, Pass side S/C to intake, Pass Side injectors, Pass side intake to head.
I don't know how to make ups or downs of the graphs, any help would be appreciated, so I know where to fix this god blasted air leak
https://www.dropbox.com/sh/hff4nlad0...lPfVNCIee5oD-a
I think that link will work, Not really used to sharing with dropbox...
just behind MAF, First CAI rubber joint, Second CAI rubber joint, TB, Inlet Elbow, Gear Case, Drvr Side S/C to Intake, Drvr Side fuel injectors, Drvr side intake to head, Vacuum bypass valve, Pass side S/C to intake, Pass Side injectors, Pass side intake to head.
I don't know how to make ups or downs of the graphs, any help would be appreciated, so I know where to fix this god blasted air leak
https://www.dropbox.com/sh/hff4nlad0...lPfVNCIee5oD-a
I think that link will work, Not really used to sharing with dropbox...
#2
Here on google drive incase dropbox doesnt work:
https://drive.google.com/folderview?...W8&usp=sharing
https://drive.google.com/folderview?...W8&usp=sharing
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-27-2015 03:16 PM