Steeda triple pass heat exchanger. WTF!
#21
I bought new bolts, lock washers, and flat washers. Bolts are M6-1.0 x 16 and washers are 6mm or M6. Got everything installed.
New bolt and washers (left). Old bolt and washers (right). It's obvious the old bolts are too short if you include the washers.
New bolts & washers installed.
Finished! I had to add an extra washer to the four bolts of one fan so the bolts don't contact the fins. I added blue loctite on all bolts.
Hopefully anyone who does this mod doesn't run into the same issue I did.
New bolt and washers (left). Old bolt and washers (right). It's obvious the old bolts are too short if you include the washers.
New bolts & washers installed.
Finished! I had to add an extra washer to the four bolts of one fan so the bolts don't contact the fins. I added blue loctite on all bolts.
Hopefully anyone who does this mod doesn't run into the same issue I did.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM