DRB

Okay, I can't install the spoiler myself but I can post pictures of it out of the box and answer questions.


It attaches in ten places - four on the central decklid section and three on each end piece. If you have the factory spoiler there are two holes to drill in the trunk lid - four if you don't have a spoiler installed - as well as three holes in either quarter panel.

There's flashing and visible seam lines on the unpainted parts, requiring some sanding and prep before painting:

DRB

Had the styling bar installed, rocker stripes removed and put on a new antenna:

A couple of exterior mods:

DRB

DRB

And here she is with the MCA:

DRB

Someone started a topic on another forum about the MMD satellite radio cover that's available from American Muscle:

http://www.americanmuscle.com/mmd-pa...nna-cover.html

It comes painted and attaches, of course, with 3M tape. It's necessarily a little bigger than the antenna itself. Here it is installed:






Here it is out of the box. It's between 1/2 to 3/4 inch bigger in all dimensions than the antenna itself, to allow for a 1/4 inch lip to hold the adhesive:



For comparison to the antenna itself:

vossen wheels

The style bar looks great color matched! Keep it up! The new spoiler should look sick too!

DRB

Thanks! Being able to have it painted to match was one of the reasons I liked the Cervini bar.

Matt's 95 Stang

Heyyyyy that looks familier...I think I might have seen one of those before . Question - how much did you pay for yours? Is it Ford OEM or aftermarket?

Looks good OP.

Matthew

DRB

It's Ford OEM, from Partscheap - about 300 bucks for the upper and 144 for the lower:

http://www.partscheap.com/2013-Ford-...3z-8200-bd.htm
http://www.partscheap.com/2013-Ford-...3z-8200-db.htm

pinn

Very nice. The bar turned out awesome.