MustangForums.com - View Single Post

lowbox · 10-14-2006, 09:55 PM

If you guy's install your parts the same way you spell, I can see why they don't fit and or work properly ! I ordered all my parts for my 04 cobra from them and never had any problem installing them or any of the parts not performing the way they should , and yes I do have the MOTOBLUE COG set up from them I did have to use the washer, but thats only because there are casting difference from one chain cover to another , and there was never anything bolted there before that used those 3 bolt holes I.E. a bracket so why would ford take the time to make sure all 3 points were the same deck height? Any true hot rodder knows YOU JUST DON'T UP THE BOX AND EXPECT THE PARTS TO FALL ON YOUR CAR! you may have to work a little

10-14-2006, 09:55 PM	#27
lowbox Join Date: Oct 2006 Posts: 1	RE: RPM Outlet is a scam If you guy's install your parts the same way you spell, I can see why they don't fit and or work properly ! I ordered all my parts for my 04 cobra from them and never had any problem installing them or any of the parts not performing the way they should , and yes I do have the MOTOBLUE COG set up from them I did have to use the washer, but thats only because there are casting difference from one chain cover to another , and there was never anything bolted there before that used those 3 bolt holes I.E. a bracket so why would ford take the time to make sure all 3 points were the same deck height? Any true hot rodder knows YOU JUST DON'T UP THE BOX AND EXPECT THE PARTS TO FALL ON YOUR CAR! you may have to work a little