Oil pans on 91 2.3 na lx...
#1
Oil pans on 91 2.3 na lx...
Anyone have an easyer way to take the oil pan off???
[IMG]local://upfiles/58446/5CCE0C6894A746F9B671B2AF89E5FFC8.jpg[/IMG]
[IMG]local://upfiles/58446/F9533B145C7B4F3F8E344398C6D2E88C.jpg[/IMG]
[IMG]local://upfiles/58446/5CCE0C6894A746F9B671B2AF89E5FFC8.jpg[/IMG]
[IMG]local://upfiles/58446/F9533B145C7B4F3F8E344398C6D2E88C.jpg[/IMG]
#2
RE: Oil pans on 91 2.3 na lx...
You're probably going to have to unbolt the motor mounts and jack the engine up. The oil pan also bolts to the transmission, so don't forget about those. I changed pans when I replaced my engine, so I can't give you exact directions, but you will have to jack the engine up a little to get the pan to clear the crossmember. It's not super difficult, just time-consuming.
#5
RE: Oil pans on 91 2.3 na lx...
it says to take it off ater the mainifold... and the two bolts at the flange are rusted.... cut what??? were is it??? i dont wanna take it of at the mainifold of at the block... because to do it i have to raise the engine and tranny at the same time... and the pipe hits the body when coming up and wont bend...