jtmustang

ha just wondering isf 24# inj.'s would be enough for this setup cast gt-40 heads that are ported and have been shaved .020, .030 trw flatops with valve reliefs ,trickflow street heat trickflow stage one cam,70 mm tb,73 maf,cold air,pullies,1.6 rollers,shorty headers,h-pipe,flowies. 24#'s or bigger

88scgt

24's should be plenty large enough

88BlueGT

24lb'ers are DEFINETLY enough... you could prob run your setup on the stockers if you really wanted to... you might be pushing the DC a little far but I bet you can do it. I would still upgrade I was just making a point

88scgt

definetly upgrade if you are thinking about it and have the cash, you never know what other bolt ons you might add in the near future

94ford5liter

I would definitely go with the 24lb. 19lb supposively hold up to 300rwhp but that is really pushin it. But 24lb injectors will be plenty, they hold up to about 350rwhp.

jtmustang

350 horse well cool then and would a 155 be big enough for that

Grunnsetning

Consider how far you're going to go in the long run. Might be worth staying with the 19s a few months if you plan on adding a nasty shot or blower in the somewhat near future because then the 24s may not be enough.

Ninety5five0

If your gonna upgrade your fuel pump just get a 255lph. It'll be there for when or if you need it in the future, and its not gonna hurt you now.