remove ignition switch?
03-16-2007, 09:32 PM
#1
4th Gear Member
Thread Starter
Join Date: Jun 2006
Location: Marietta, ga
Posts: 1,050
remove ignition switch?
how do i remove the igniton switch for my car? i am just trying to get it from my '91 lx to my 87' gt. i am pretty sure they are the same but i don't have a manual to look at, my haynes sucks and couldn't find it. so if you guys could tell me how i would greatly apprechiate it as i am working on my car right now.
03-16-2007, 09:47 PM
#4
4th Gear Member
Thread Starter
Join Date: Jun 2006
Location: Marietta, ga
Posts: 1,050
RE: remove ignition switch?
not sure what its called but the part the key goes into. you can move it freely without the key and it will give power and such to the car so i need that switched. i already replaced the part where the wires go into, which i guess would be electrical.
03-16-2007, 09:52 PM
#5
The Rogue Mod
Join Date: Feb 2006
Location: Maryland Sucka's!!
Posts: 21,918
RE: remove ignition switch?
Remove the plastic covering on the column. Turn the key to the on position. Look under where the lock cylinder goes into the column. There will be a lil pin sticking down through the column. Push the pin upward, remove the lock cylinder. Install in reverse. The lock cylinder MUST be in the on (not run)position for the the pin to depress.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
