[bigedog8]

hmmm. I'm gonna estimate around 6-8 hours or so.... give or take, It was a 2 day leisure project so it was on-off sort of deal. unbolt some stuff. do some cutting. go eat easter dinner. work more then go inside for an hour or so to rest.... so it was hard to keep track of, but maybe 6 hours of total work. now if I would have had a torch or angle grinder w/cutoff wheel. it would have taken significantly less time, keep in mind I used a dremel to cut all that **** out lol. bumper support took a long time to cut. had to cut some pipe too. because re-clocking the intercooler is just cut an allen key down and undo 6 bolts,turn the s/c and bolt it back up. piping really wasnt too long. my buddy was helping me out doing the discharge side so it didnt take long. but he only helped about half the time of working on it so it was mostly only me since he had work on monday and I had no class.

If you had the right tools for cutting and worked hard (we were drinking beer pissing around most all the time because thats a necessity to work on vehicles and have fun doin it) it probably wouldnt take more than 3-4 hours tops.