2013 front end
#2
It looks like the grille for a 2013 v8 will fit in the 2013 v6
http://www.americanmuscle.com/boss-g...blem-2013.html
http://www.americanmuscle.com/boss-g...blem-2013.html
#3
The V-6, GT, and Boss all have the same front bumper. The only thing to watch out for is that the GT and Boss grilles have a black grille surround to clear the fog light ports instead of the chrome V-6 grille surround. I don't think the billet-style V-6 MCA and GT/CS grilles need that surround.
#8
No its not posing, OP.
Most people aren't going to be able to tell the difference when you change out grilles. Those that will be able to tell the difference should also be able to pick up on the fact that its a V6.
That grille looks sick. Go for it.
Most people aren't going to be able to tell the difference when you change out grilles. Those that will be able to tell the difference should also be able to pick up on the fact that its a V6.
That grille looks sick. Go for it.
#9
Forgot to add that if your V-6 is a base model, you will need to replace the light switch and buy or make the proper wiring harness to make the GT foglights work. LMR sells a wiring kit including the switch:
http://www.latemodelrestoration.com/...ing-Switch-Kit
http://www.latemodelrestoration.com/...ing-Switch-Kit
#10
I have a v6 premium pony package, so it includes fog lights. Can i use the fog light wiring on a GT grille with those fog lights?
Pretty much, is the wiring the same for pony package fog lights and GT fog lights?
This right here:
http://www.ebay.com/itm/280915701418...ht_1916wt_1393
Pretty much, is the wiring the same for pony package fog lights and GT fog lights?
This right here:
http://www.ebay.com/itm/280915701418...ht_1916wt_1393