HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
#1
HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
Trying to find out ifhow subframe connectors(full length connectors)is suppose to look when installed. do they suppose to have just the plates connected to the body or do the complete connectors attach to the body?any info would help thanks
#5
RE: HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
I am waiting on my buddy who can weld to take a ride with me to the garage so I can get mine on...I bought a set of the UPR full-lengths
I was under there today doing my control arms...and I was suprised to see the seat bolts were at an angle. I thought they would be straight so the subframe connectors can bolt right onto them...I guess they are bent a bit to accomodate...
I was under there today doing my control arms...and I was suprised to see the seat bolts were at an angle. I thought they would be straight so the subframe connectors can bolt right onto them...I guess they are bent a bit to accomodate...
#7
RE: HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
btw, get those ones like he has w/ the t bracing for the seats, foxes are prone to ripping through sheet metal from the right bolt on the left seat (and opposite for the rt (pass) side)
hpm's are like that not sure which he had, great pics too , nice job
if you can weld good, yes easy to make, 90% of people who "think" they can weld, cannot
they can put metal onto metal, but not actually bond it well , and the weld breaks , just my opinion though, for $89 i just buy them
hpm's are like that not sure which he had, great pics too , nice job
if you can weld good, yes easy to make, 90% of people who "think" they can weld, cannot
they can put metal onto metal, but not actually bond it well , and the weld breaks , just my opinion though, for $89 i just buy them
#8
RE: HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
already have maximum motor sport fullength version with the seat bracket cost $150 but i need it installed.
does anyone knows someone in Phoenix,AZ
does anyone knows someone in Phoenix,AZ
#9
RE: HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
ORIGINAL: cheetha94607
already have maximum motor sport fullength version with the seat bracket cost $150 but i need it installed.
does anyone knows someone in Phoenix,AZ
already have maximum motor sport fullength version with the seat bracket cost $150 but i need it installed.
does anyone knows someone in Phoenix,AZ
#10
RE: HOW DOES SUBFRAME CONNECTORS SUPPOSE TO LOOK INSTALLED?
thanks went there today 04/28/07 to install cost $270.but while i was there i bought a kirban regulator and a bbk 255lph fuel pump. is $270 to much to install?