RE: CDC Shaker Hood Install (w/pic & vid)
Quote:
ORIGINAL: bchataroo
Hey Taco, do you have a writeup for changing shocks/struts? Hint Hint
Thanks for all of the instructions. I still say you should sell them to the manufacturers.
|
Struts, yes. It's in the Steeda Ultralite write-up. After you remove the top bearing cap, that's it.. swap in your new struts.
Shocks, no. But, it looks way more easier than changing out the struts. In the same write-up, after you unbolt the lower shock mount bolt, all that's left is accessing the bolt up top, and out she goes!
As far as selling my write-ups, maybe one day. But, in the meantime, enjoy the freebies! 
Quote:
ORIGINAL: Fletch
By the way, where are those rear window louvers you got from DG? I noticed they weren't on in the pics...
|
Good eye, Fletch!
Shaker was installed before my DG louvers.
__________________
2006 Mustang GT
Mods: MMR, Vortech V-2, FRPP 39# Injectors, KB BAP, FRPP CMDP's, Fluidyne Aluminum Radiator, Canton tanks, Centerforce DF Clutch, Fidanza Billet Aluminum Flywheel, JBA Silver Ceramic Shorty Headers, Pypes O/R-H, FRPP Stingers, Steeda Billet LCA, Steeda Ultralite Springs, MGW Shifter, Coast Aluminum DS, BMR DS Loop, FRPP 4.10 Gears, Prothane Motor Mounts, Saleen-StopTech 4-Piston BBK, 20" +24 Razors, Nitto 555, Meziere H2O Pump, Gatorback Serpentine, 5K HID Kit, Tuned by RET.
|