LOUDexhaust

I ripped out my old clutch cable w/o thinking and now i don't know where to route it or if its ok near the headers. If someone has a pic or good description do share.

WhiteFoxGT

This is a bad pic, but it wasnt even to show the cable, but you can see a general idea. It should mount on a hole near the fender well, and go in front of the K-member and back to the trans.



[IMG]local://upfiles/42580/437A5DBB7B754709A435F72B1280A483.jpg[/IMG]

5.0liter_rice_eater

good god try to stay from the headers!

50Trippin

LOUDexhaust

thanks. you didn't have to pull your motor to get me pics though.

LOUDexhaust

Ok I got everything installed. Now how do I get the clutch pedal even with the brake?

50Trippin

Lucky for you I already had it pulled I took tons of pics from start to almost finished..... nother couple of weekends til she's done. As far as making them level.....dunno. Haven't gotten that far yet.

kilgorq

I figured out the bottom part on this but where does it go through the firewall on an 86 with a speedometer cable. The picture looks like clutch cable goes into the speedo hole.

WhiteFoxGT

Was your car an auto to T5 swap??? If so, you have to take out the speedo cable, and re-route is thru the blank gromet about 5 inches to the left on the firewall, and the clutch cable goes in where the speedo cable went.

kilgorq

Yes it is. I noticed the gromet there but was not sure... Thank you.