351w swap
01-30-2011, 06:59 PM
4th Gear Member
Thread Starter
Join Date: Jan 2008
Location: nw ohio
Posts: 1,556
351w swap
ok so i have been reading alot about doin this swap and every1 says that u need a new balancer but i dont under stand y i cant use the one off my 95 351w engine
01-31-2011, 09:50 PM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
because unless you are using all of the original accessories, and accessory brackets, the belt will not line up.
get a new balancer, one for a fox swap
01-31-2011, 11:16 PM
4th Gear Member
Thread Starter
Join Date: Jan 2008
Location: nw ohio
Posts: 1,556
ok thanks man was just wonder why
02-05-2011, 05:42 PM
4th Gear Member
Thread Starter
Join Date: Jan 2008
Location: nw ohio
Posts: 1,556
what size carb would i need with a roller 351 with a cam and some ported gt 40 heads i dont know if the 650 holley i have will be to small
02-05-2011, 09:51 PM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
02-05-2011, 10:38 PM
4th Gear Member
Thread Starter
Join Date: Jan 2008
Location: nw ohio
Posts: 1,556
ok tahnks again man i didnt know if i should go to a 750 or not
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
19
12-19-2023 01:12 PM
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
09-30-2015 05:54 PM
UrS4
S197 Handling Section
1
09-30-2015 10:13 AM
