Ze2222

Hi guys i just bought a used moroso 63810 alternator bracket kit for my 351w powered foxbody. Though it doesn't have any instructions. i have been to there website but the intstructions are not the best.
My question is with the stud they send in the kit. Does that go into the head and the Large stand off with the hex on one end thread onto the stud?

I hope someone can chime in.

Ze2222

Hi guys. I've included some pics sorry i didn't post them sooner. LOL no i didn't think you guys were mind readers lol. Reading back again doesn't make much sense but hopefully with the pics you will better see.

In the pic shows all that came with the kit.
My question is with the very left of the pic. The stud and the large hex piece.
Does the stud thread into the head then the hex piece onto that then the alternator and spaces as needed?

Hope with the pics someone can chime in.
I'm using a csr electric waterpump.

Ze2222

hi guys me again. K well i was in the garage figuring **** out. I figured out this kit would not work with my csr electric waterpump. Fudge lol my bad.
K well now my next question is what would you guys recommend for electric waterpumps. Moroso makes one that flows 35 gpm and doesn't have rf suppression where as the meziere does offer rf suppression and flows 55 gpms but with a more hefty price tag. I'm leaning towards the meziere can anyone give me any pros or cons or what they have had good experiences with.
Can you use a serptenine belt system with this one. I was reading summit catelogue and it says not for serp?