K Member Compatibility
#1
K Member Compatibility
I'm working on a 351 swap into my mustang and I had a question about the k member compatibility. I know a 94 or 95 GT will work but will the k member out of a fox body work in my 2000 for mounting the 351W?
#3
See how ours are slotted (the bolt holes farthest away from you in this pic)
http://www.uprproducts.com/mustang-p...member-79.html
#4
ok so i can get a fox k member and just open up the rear mounting holes a little bit and it will fit right? that makes it a little bit easier. i also plan on getting a MSD 6200 to run the engine, what's a good distributor type to use? and would anyone have a used one they would be selling?
#5
I was always under the impression that the fox body K-member will not bolt into the New Edge and that the 94-95 was the only K-member that was compatible. Outside of using the 94-95 I was told there is a company that makes K-members specifically for the pushrod > New Edge swap.
#6
I was always under the impression that the fox body K-member will not bolt into the New Edge and that the 94-95 was the only K-member that was compatible. Outside of using the 94-95 I was told there is a company that makes K-members specifically for the pushrod > New Edge swap.
#7
Not to thread hijack - but UPRSHARAD can you pm me - I have a question about identifying a UPR KMember I bought - bought it from a guy who said its for a 5.0 in fox/94,95 5.0
Something makes me wonder...the motor mount locations are strange.
Something makes me wonder...the motor mount locations are strange.
#8
#9
That looks like it might be our old style 79-95 5.0 k-member. You can call the shop at 561.588.6630 and discuss it with them if you want to be sure.