89 mustang

hey guys i changed my set up from a 347 10.1 to a 408 stroker 11.5 compression my 347 maid 390whp so i was woundering how much would the 408 might make?
mods
-RPM 408 stoker H beem rods fully balenced
-trick flow hi port heads, ported with 208 intake valves
- custum grind cam with 600 total lift
-trick flow R box intake
-90mm tb
-95mm mass air meter
-50lb injectors
-255 fuel pump
- bbk fuel rails
-twecer to tune with. im kinda shooting for 480 whp is this posible??

some input would healp thanks..

89 mustang

for got to mention that its a solid rollor set up.

Duncan_GT

I'd say youre over 500rwhp. What size heads are you using?

tinman

Should be closer to 600HP than 500HP.
What kind of duration/lift?
.600 lift is not a real big lift nowadays, my 352 stroker motor is at .630

Duncan_GT

600 at the wheels?

95 BLOWN GT

how did you come up with your parts list ? will it stay n.a or will you spray it ?

89 mustang

will stay na for now.. i plan to spray it later on.

89 mustang

im using the Trick flow hi port heads. there similar to the trick flow track heat..