carb to efi
#1
carb to efi
Sup dudes! I have a 86 notch with a 393 stroker. I wanna go efi over this winter cuz id like better gas mileage lol. My question is will i have to convert to a roller cam setup from the flat tappet that i run now? Some say yea, others say no. Id like some opinions if possible, thanks!!!! O the motor has 10:1 comp, man o war 18 degree 200cc heads, and comp cams 300 duration 558 lift cam.
#4
Sup dudes! I have a 86 notch with a 393 stroker. I wanna go efi over this winter cuz id like better gas mileage lol. My question is will i have to convert to a roller cam setup from the flat tappet that i run now? Some say yea, others say no. Id like some opinions if possible, thanks!!!! O the motor has 10:1 comp, man o war 18 degree 200cc heads, and comp cams 300 duration 558 lift cam.
scroll to the bottom, it goes in place of your carb.This seems easy because it will self tune to your engine, just give your car a EFI fuel pump setup in the tank from a 5.0 donor, or get a 5.0 tank and wiring etc for efi
Dont know the cost, or you can ****** the whole setup from a 5.0 crow vic, van,truck or mustang etc of the years 88-93, then get 36 or 42lb injectors and dyno tune.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM