MustangForums.com - View Single Post - MAC cat-back not fitting

sgtbraddick · 07-17-2007, 10:54 AM

well I understand about not wanting t cut and weld. As you said before if you can get the back of the car up high enough to drop the diff. it would be more work but it would keep it in 1 piece. Good luck. I'm not sure on the 95's but if you drop the rear check the abs sensors on the axle's you might have to disconnect them if they are there. Not sure if they are the same as my 97

07-17-2007, 10:54 AM	#4
sgtbraddick 2nd Gear Member Join Date: Jul 2007 Location: Posts: 246	RE: MAC cat-back not fitting well I understand about not wanting t cut and weld. As you said before if you can get the back of the car up high enough to drop the diff. it would be more work but it would keep it in 1 piece. Good luck. I'm not sure on the 95's but if you drop the rear check the abs sensors on the axle's you might have to disconnect them if they are there. Not sure if they are the same as my 97 __________________