RE: Here's a picture of my engine bay, where is yours?
Ok here's mine... 1973 Mach 1 351C Q code with 11.0 compression. Balanced rotating assembly , block line bored and deck plated , oil holes chamfered on the crank, ARP bolts, stock CJ rods , TRW pop-ups , stock 4 barrel heads with good valves, springs etc ... , Boss 351 camshaft , 1971 issue Ford D1ZX Buddy Bar aluminum intake , Boss 351 aluminum valve covers , original factory dual point distributor with Petronix ignition , factory Motorcraft 4 barrel carb. Ram air system removed from 71 Boss 351 .
Horsepower rating ? I dunno.
Runs better than it did when new I'm sure.
Engine bay paint by restoration shop. No idea what the paint code is.
Used correctFord part numberedbelts, hoses , cables , solenoid , coil etc...
Restored including replacing factory P=paint , T=trim , F=finish etc ... stickers in correct locations.
[IMG]local://upfiles/26494/3B26730F3BBB4D0489BD8F98C01BD14F.jpg[/IMG]
[IMG]local://upfiles/26494/54D7322EFCF245A6A11813F55E8E9435.jpg[/IMG]
[IMG]local://upfiles/26494/6DDBB7BDD5E14BFEA10FB830405058E9.jpg[/IMG]
__________________
|