How to remove pinion????
#1
How to remove pinion????
I am trying to change my gears. I have done this before but it has been a while. I got the pinion flange off and now I am trying to pull the pinion from the housing. It is stuck in there....do I need to remove the front bearing or should I just hammer on it until it falls out??
#2
RE: How to remove pinion????
Heat the bearing up with a torch for about 15 minutes, then beat the **** out of it. Only bad thing is you might destroy the pinion but if you're putting a new one in no big deal.
#4
RE: How to remove pinion????
RE-install Old pinion nut(only if you have a new one)(so you dont screw up the threads)...Big Rubber mallet(or BFH)....hammer away.it will come out....just have someone in back to catch it when it finallyflys out....
#6
RE: How to remove pinion????
ORIGINAL: 99StangGTTN
OK well the threads are already screwed...oh well. I decided I don't have a big enough hammer so I am just gonna wait til tom to get a bigger hammer....
OK well the threads are already screwed...oh well. I decided I don't have a big enough hammer so I am just gonna wait til tom to get a bigger hammer....
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM